OG Vapes Apollo Atomizer Replacement
- Atomizer Replacement
OG Vapes Apollo
The OG Vapes Apollo Atomizer is a replacement for your e-Nail that allows you to enjoy your essential oils and concentrates.
- Fully charge the Apollo e-Rig before your first use. The device will pulse red while charging and turn off automatically when complete.
- Fill the glass with water just above the air-holes. Do not fill the glass while attached to the base. Do not allow water in the lower section.
- Align the inlet hole on the front of the glass with atomizer. Carefully push the front of the glass into the base then back.
- Turn the device on/off by clicking the power button 5 times quickly.
- Click the power button three times quickly to select the heat settings.
- Use the loading tool to place contents on the bottom surface of the bowl.
- Place the carb cap on top of the atomizer.
- Hold down the button for 3 seconds to initiate heat up. It takes about 30 seconds. Press and hold button anytime to exit. The pulsing light indicates the heat-mode is on.
- The device has a long beeping tone and the light will flash when it's ready for you to hit it.
- Use a cotton swab to clean the chamber after each use.
- 1 x Atomizer Cover
- 1 x Ceramic Nail